Go It Alone Or Hire a Pro? Installing a Security Light
If you've thought about doing some DIY home improvements in an effort to save money or just want to learn a new skill, it's important to know when it's okay to go it alone and when to hire a pro. In this month's installment of this ongoing feature, we look at installing an outdoor motion-sensor security light.
A motion-sensor security light is an inexpensive upgrade to your home’s outdoor lighting that can enhance safety and provide tremendous convenience when your hands are full.
Depending on where you live and the complexity of the installation, an electrician will often charge between $70 and $150 to replace an existing fixture with a motion sensor. However, you may be able to do it yourself and pocket the savings. Here’s how to tell.
It’s OK to do it yourself if:
- You have a basic understanding of electrical wiring
- You have the necessary tools and supplies (screw driver, wire stripper, wire cutter, voltage meter, wire nuts, electrical tape)
- You can easily access the outlet where an existing light is installed
You should hire a pro if:
- You’re uncomfortable working with electricity
- You can’t safely access the existing lighting fixture
- You’re installing a new fixture and need to run wiring to it
The specific instructions for installing and calibrating your new motion sensor will vary depending on the fixture you purchase. Here are a few tips to keep in mind:
- To simplify installation, choose a replacement fixture with a base that’s similar in size and shape to the fixture you’re replacing.
- Be certain to turn off power to the fixture at the circuit breaker before you expose any wires. You can test for power using the light switch, but it’s best to test the wires for voltage using a voltage tester to be certain.
- Make sure to seal your new fixture from moisture. You can run a bead of silicone sealant around the top of the base to keep water from getting in from above. Leave a portion of the bottom of the base unsealed so water can drain out if it does get in.
Most well-equipped homeowners who know how electrical wiring works can replace an outdoor light fixture with a motion-sensor light fairly quickly. It’s a relatively simple project—if you have the right tools and skills.
If you need to hire a professional contractor for this project or any other, you can find quick, easy and free referrals at contractorfinder.ahs.com, brought to you by Home Advisor.
American Home Shield is providing the information for general guidance only. Due to the general nature of the property maintenance and improvement advice in this material, neither American Home Shield Corporation, nor its licensed subsidiaries assumes any responsibility for any loss or damage which may be suffered by the use of this information.
Easy Ways to Avoid Frozen Pipes
Frozen pipes are more than a nuisance. A frozen pipe can burst and lead to water damage, leaving you without water until it’s repaired. Even if you live in a normally warm climate, one unusually cold night can lead to disaster if you’re not prepared. Here’s how you can keep the water flowing safely in your home.
Trends in Home Automation
These days, you’re probably hearing a lot of buzz about home automation systems that allow homeowners to remotely access and control things, like heating, air conditioning, and even some kitchen appliances, using a smartphone. Here’s a look at the different systems in the market, and a peek at what may be coming next.
Frozen Solid: How to Pack Your Freezer
Energy-efficient appliances can help you reduce your home’s environmental impact and reduce your monthly energy bill. Since your refrigerator runs 24/7, it’s one of the biggest contributors to energy usage in most homes. But did you know that the way you pack and arrange the items in your freezer can have a direct impact on its efficiency? Here are some tips to help you save some cold hard cash by getting the most from your freezer.